Pesquisar este blog
sexta-feira, 7 de dezembro de 2018
Tensile Test and Quality Analysis
Yesterday (07/12/2018) we performed the tensile test of our riveted joint. This test was a final analysis of our design, in a joint designed and manufactured by the test team that withstood a 40kN draw request. Unfortunately, it is by no means reached the mark of 33.5kN, given the mismatches and problems during the drafting of the project and was an excellent brand. By voting qualitatively the result of the project we consider very satisfactory. The sizing of the covers was quite accurate and the rest of the differences between the design project and the rivet did not meet the needs. In this way, comparing the design data and the made covers and splints we have: Spacing between the promoted plates: 0.00 mm Spacing between made sheets: 2.40 mm Free length for guarded claw: 100.00 mm Free length 1 (real) for the claw: 100.00 mm Free length 2 (real) for the claw: 98.35 mm Sum of the thicknesses of the covers equal to that projected, with a value of ½ '' The best, most recent concentrations and accuracy in diameter diameter are sometimes their punctured concentrates for the future pierce them in the spinal drill.
Assinar:
Postar comentários (Atom)
Nenhum comentário:
Postar um comentário